| File(s) | Type | Description | Action |
|---|---|---|---|
bot_TT012.csv (90.44 KB) | Comma Separated Values (.csv) | version September 5, 2002 (original version June 3, 1994) Jim Murray Thomas Thompson cruise TT012 Basic bottle cast measurements (depth, temperature, salinity, oxygen, density, potental temp., etc.). NOTE: J. Murray has flagged the CTD up cast, bottle trip variables (Marker temperature and Marker salinity) as being suspect and should not be used. Selected down cast CTD temperatures and salinities replace these variables. However, if there is interest in the marker temperatures and salinities a file containing these variables is available from the data management office. IMPORTANT: See NOTE in brief description link regarding cracked conductivity sensor. event = event/operation number from event log sta = station number from event log. Station numbers prefixed with a cast = ctd cast number from event log qflag = set by J. Murray, * identifies problems with the data reported at that level. (mis-trips, suspect salinity, etc). See See Murray documentation under 'Documentation' link. bot = ctd rosette bottle number depth = sample depth reported as meters, units = meters press = sample depth reported as pressure, units = decibars pressbin = the one decibar bin averaged pressure interval from which the following CTD variables were extracted ctdtemp = ctd temperature, units = degress centigrade ctdsal = ctd salinity, parts/thousand ctdsig_t = ctd sigma-t botox = bottle oxygen, units = milliliters/liter botsal = bottle salinity, units = parts/thousand ctdpotemp = ctd potental temperature, units = degrees centigrade ctdsig_th = ctd potental density, units = kilograms/cubic meter nd = missing data DMO QC note (020905): depth was missing for event 10061202; only nominal pressure data was reported; nominal depth was calculated from nominal press and added to this ... | |
bot_TT011.csv (310.28 KB) | Comma Separated Values (.csv) | version June 2, 1994 Jim Murray Thomas Thompson cruise TT011 Basic bottle cast measurements (depth, temperature, salinity, oxygen, density, potental temp., etc.). NOTE: J. Murray has flagged the CTD up cast, bottle trip variables (Marker temperature and Marker salinity) as being suspect and should not be used. Selected down cast CTD temperatures and salinities replace these variables. However, if there is interest in the marker temperatures and salinities a file containing these variables is available from the data management office. event = event/operation number from event log sta = station number from event log. qflag = quality flag - J. Murray identifies stations with a * as those having problems with the data reported at that level. (mis-trips, suspect salinity, etc). See Murray documentation under 'Documentation' link. cast = ctd cast number from event log bot = ctd rosette bottle number depth = sample depth reported as meters, units = meters press = sample depth reported as pressure, units = decibars pressbin = the one decibar bin averaged pressure interval from which the following CTD variables were extracted ctdtemp = ctd temperature, units = degress centigrade ctdsal = ctd salinity, parts/thousand ctdsig_t = ctd sigma-t botox = bottle oxygen, units = milliliters/liter botsal = bottle salinity, units = parts/thousand ctdpotemp = ctd potental temperature, units = degrees centigrade ctdsig_th = ctd potental density, units = kilograms/cubic meter nd = missing data | |
bot_TT008.csv (71.95 KB) | Comma Separated Values (.csv) | version October 17, 2002 (original version June 1, 1994) Jim Murray Thomas Thompson cruise TT008 Basic bottle cast measurements (depth, temperature, salinity, oxygen, density, potental temp., etc.). NOTE: J. Murray has flagged the CTD up cast, bottle trip variables (Marker temperature and Marker salinity) as being suspect and should not be used. Selected down cast CTD temperatures and salinities replace these variables. However, if there is interest in the marker temperatures and salinities a file containing these variables is available from the data management office. event = event/operation number from event log sta = station number from event log. qflag = quality flag - J. Murray identifies stations with a * as those having problems with the data reported at that level. (mis-trips, suspect salinity, etc). See Murray documentation under 'Documentation' link. cast = ctd cast number from event log bot = ctd rosette bottle number depth = sample depth reported as meters, units = meters press = sample depth reported as pressure, units = decibars pressbin = the one decibar bin averaged pressure interval from which the following CTD variables were extracted ctdtemp = ctd temperature, units = degress centigrade ctdsal = ctd salinity, parts/thousand ctdsig_t = ctd sigma-t botox = bottle oxygen, units = milliliters/liter botsal = bottle salinity, units = parts/thousand ctdpotemp = ctd potental temperature, units = degrees centigrade ctdsig_th = ctd potental density, units = kilograms/cubic meter nd = missing data | |
bot_TT007.csv (277.08 KB) | Comma Separated Values (.csv) | version Jul 5, 1995 Jim Murray Thomas Thompson cruise TT007 Basic bottle cast measurements (depth, temperature, salinity, oxygen, density, potental temp., etc.). NOTE: J. Murray has flagged the CTD up cast, bottle trip variables (Marker temperature and Marker salinity) as being suspect and should not be used. Selected down cast CTD temperatures and salinities replace these variables. However, if there is interest in the marker temperatures and salinities a file containing these variables is available from the data management office. qflag = quality flag - J. Murray identifies stations with a * as those having problems with the data reported at that level. (mis-trips, suspect salinity, etc). See Murray documentation under 'Documentation' link. |
Files
Filename: bot_TT012.csv (90.44 KB)
Type: Comma Separated Values (.csv)
Description: version September 5, 2002 (original version June 3, 1994) Jim Murray Thomas Thompson cruise TT012 Basic bottle cast measurements (depth, temperature, salinity, oxygen, density, potental temp., etc.). NOTE: J. Murray has flagged the CTD up cast, bottle trip variables (Marker temperature and Marker salinity) as being suspect and should not be used. Selected down cast CTD temperatures and salinities replace these variables. However, if there is interest in the marker temperatures and salinities a file containing these variables is available from the data management office. IMPORTANT: See NOTE in brief description link regarding cracked conductivity sensor. event = event/operation number from event log sta = station number from event log. Station numbers prefixed with a cast = ctd cast number from event log qflag = set by J. Murray, * identifies problems with the data reported at that level. (mis-trips, suspect salinity, etc). See See Murray documentation under 'Documentation' link. bot = ctd rosette bottle number depth = sample depth reported as meters, units = meters press = sample depth reported as pressure, units = decibars pressbin = the one decibar bin averaged pressure interval from which the following CTD variables were extracted ctdtemp = ctd temperature, units = degress centigrade ctdsal = ctd salinity, parts/thousand ctdsig_t = ctd sigma-t botox = bottle oxygen, units = milliliters/liter botsal = bottle salinity, units = parts/thousand ctdpotemp = ctd potental temperature, units = degrees centigrade ctdsig_th = ctd potental density, units = kilograms/cubic meter nd = missing data DMO QC note (020905): depth was missing for event 10061202; only nominal pressure data was reported; nominal depth was calculated from nominal press and added to this ...
Type: Comma Separated Values (.csv)
Description: version September 5, 2002 (original version June 3, 1994) Jim Murray Thomas Thompson cruise TT012 Basic bottle cast measurements (depth, temperature, salinity, oxygen, density, potental temp., etc.). NOTE: J. Murray has flagged the CTD up cast, bottle trip variables (Marker temperature and Marker salinity) as being suspect and should not be used. Selected down cast CTD temperatures and salinities replace these variables. However, if there is interest in the marker temperatures and salinities a file containing these variables is available from the data management office. IMPORTANT: See NOTE in brief description link regarding cracked conductivity sensor. event = event/operation number from event log sta = station number from event log. Station numbers prefixed with a cast = ctd cast number from event log qflag = set by J. Murray, * identifies problems with the data reported at that level. (mis-trips, suspect salinity, etc). See See Murray documentation under 'Documentation' link. bot = ctd rosette bottle number depth = sample depth reported as meters, units = meters press = sample depth reported as pressure, units = decibars pressbin = the one decibar bin averaged pressure interval from which the following CTD variables were extracted ctdtemp = ctd temperature, units = degress centigrade ctdsal = ctd salinity, parts/thousand ctdsig_t = ctd sigma-t botox = bottle oxygen, units = milliliters/liter botsal = bottle salinity, units = parts/thousand ctdpotemp = ctd potental temperature, units = degrees centigrade ctdsig_th = ctd potental density, units = kilograms/cubic meter nd = missing data DMO QC note (020905): depth was missing for event 10061202; only nominal pressure data was reported; nominal depth was calculated from nominal press and added to this ...
Filename: bot_TT011.csv (310.28 KB)
Type: Comma Separated Values (.csv)
Description: version June 2, 1994 Jim Murray Thomas Thompson cruise TT011 Basic bottle cast measurements (depth, temperature, salinity, oxygen, density, potental temp., etc.). NOTE: J. Murray has flagged the CTD up cast, bottle trip variables (Marker temperature and Marker salinity) as being suspect and should not be used. Selected down cast CTD temperatures and salinities replace these variables. However, if there is interest in the marker temperatures and salinities a file containing these variables is available from the data management office. event = event/operation number from event log sta = station number from event log. qflag = quality flag - J. Murray identifies stations with a * as those having problems with the data reported at that level. (mis-trips, suspect salinity, etc). See Murray documentation under 'Documentation' link. cast = ctd cast number from event log bot = ctd rosette bottle number depth = sample depth reported as meters, units = meters press = sample depth reported as pressure, units = decibars pressbin = the one decibar bin averaged pressure interval from which the following CTD variables were extracted ctdtemp = ctd temperature, units = degress centigrade ctdsal = ctd salinity, parts/thousand ctdsig_t = ctd sigma-t botox = bottle oxygen, units = milliliters/liter botsal = bottle salinity, units = parts/thousand ctdpotemp = ctd potental temperature, units = degrees centigrade ctdsig_th = ctd potental density, units = kilograms/cubic meter nd = missing data
Type: Comma Separated Values (.csv)
Description: version June 2, 1994 Jim Murray Thomas Thompson cruise TT011 Basic bottle cast measurements (depth, temperature, salinity, oxygen, density, potental temp., etc.). NOTE: J. Murray has flagged the CTD up cast, bottle trip variables (Marker temperature and Marker salinity) as being suspect and should not be used. Selected down cast CTD temperatures and salinities replace these variables. However, if there is interest in the marker temperatures and salinities a file containing these variables is available from the data management office. event = event/operation number from event log sta = station number from event log. qflag = quality flag - J. Murray identifies stations with a * as those having problems with the data reported at that level. (mis-trips, suspect salinity, etc). See Murray documentation under 'Documentation' link. cast = ctd cast number from event log bot = ctd rosette bottle number depth = sample depth reported as meters, units = meters press = sample depth reported as pressure, units = decibars pressbin = the one decibar bin averaged pressure interval from which the following CTD variables were extracted ctdtemp = ctd temperature, units = degress centigrade ctdsal = ctd salinity, parts/thousand ctdsig_t = ctd sigma-t botox = bottle oxygen, units = milliliters/liter botsal = bottle salinity, units = parts/thousand ctdpotemp = ctd potental temperature, units = degrees centigrade ctdsig_th = ctd potental density, units = kilograms/cubic meter nd = missing data
Filename: bot_TT008.csv (71.95 KB)
Type: Comma Separated Values (.csv)
Description: version October 17, 2002 (original version June 1, 1994) Jim Murray Thomas Thompson cruise TT008 Basic bottle cast measurements (depth, temperature, salinity, oxygen, density, potental temp., etc.). NOTE: J. Murray has flagged the CTD up cast, bottle trip variables (Marker temperature and Marker salinity) as being suspect and should not be used. Selected down cast CTD temperatures and salinities replace these variables. However, if there is interest in the marker temperatures and salinities a file containing these variables is available from the data management office. event = event/operation number from event log sta = station number from event log. qflag = quality flag - J. Murray identifies stations with a * as those having problems with the data reported at that level. (mis-trips, suspect salinity, etc). See Murray documentation under 'Documentation' link. cast = ctd cast number from event log bot = ctd rosette bottle number depth = sample depth reported as meters, units = meters press = sample depth reported as pressure, units = decibars pressbin = the one decibar bin averaged pressure interval from which the following CTD variables were extracted ctdtemp = ctd temperature, units = degress centigrade ctdsal = ctd salinity, parts/thousand ctdsig_t = ctd sigma-t botox = bottle oxygen, units = milliliters/liter botsal = bottle salinity, units = parts/thousand ctdpotemp = ctd potental temperature, units = degrees centigrade ctdsig_th = ctd potental density, units = kilograms/cubic meter nd = missing data
Type: Comma Separated Values (.csv)
Description: version October 17, 2002 (original version June 1, 1994) Jim Murray Thomas Thompson cruise TT008 Basic bottle cast measurements (depth, temperature, salinity, oxygen, density, potental temp., etc.). NOTE: J. Murray has flagged the CTD up cast, bottle trip variables (Marker temperature and Marker salinity) as being suspect and should not be used. Selected down cast CTD temperatures and salinities replace these variables. However, if there is interest in the marker temperatures and salinities a file containing these variables is available from the data management office. event = event/operation number from event log sta = station number from event log. qflag = quality flag - J. Murray identifies stations with a * as those having problems with the data reported at that level. (mis-trips, suspect salinity, etc). See Murray documentation under 'Documentation' link. cast = ctd cast number from event log bot = ctd rosette bottle number depth = sample depth reported as meters, units = meters press = sample depth reported as pressure, units = decibars pressbin = the one decibar bin averaged pressure interval from which the following CTD variables were extracted ctdtemp = ctd temperature, units = degress centigrade ctdsal = ctd salinity, parts/thousand ctdsig_t = ctd sigma-t botox = bottle oxygen, units = milliliters/liter botsal = bottle salinity, units = parts/thousand ctdpotemp = ctd potental temperature, units = degrees centigrade ctdsig_th = ctd potental density, units = kilograms/cubic meter nd = missing data
Filename: bot_TT007.csv (277.08 KB)
Type: Comma Separated Values (.csv)
Description: version Jul 5, 1995 Jim Murray Thomas Thompson cruise TT007 Basic bottle cast measurements (depth, temperature, salinity, oxygen, density, potental temp., etc.). NOTE: J. Murray has flagged the CTD up cast, bottle trip variables (Marker temperature and Marker salinity) as being suspect and should not be used. Selected down cast CTD temperatures and salinities replace these variables. However, if there is interest in the marker temperatures and salinities a file containing these variables is available from the data management office. qflag = quality flag - J. Murray identifies stations with a * as those having problems with the data reported at that level. (mis-trips, suspect salinity, etc). See Murray documentation under 'Documentation' link.
Type: Comma Separated Values (.csv)
Description: version Jul 5, 1995 Jim Murray Thomas Thompson cruise TT007 Basic bottle cast measurements (depth, temperature, salinity, oxygen, density, potental temp., etc.). NOTE: J. Murray has flagged the CTD up cast, bottle trip variables (Marker temperature and Marker salinity) as being suspect and should not be used. Selected down cast CTD temperatures and salinities replace these variables. However, if there is interest in the marker temperatures and salinities a file containing these variables is available from the data management office. qflag = quality flag - J. Murray identifies stations with a * as those having problems with the data reported at that level. (mis-trips, suspect salinity, etc). See Murray documentation under 'Documentation' link.